Category Archives: Utah

Trade School Plumbing Riverton UT

How to Enroll in the Best Plumbing Training near Riverton Utah

Riverton UT plumbing contractor installing sinkThe first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing school near Riverton UT. But with numerous technical schools to select from, just how do you undertake making sure that you enroll in the best one? Especially because there are a number of points to examine. For instance, many potential students will start by looking for schools that are nearby their residence. When they have located some that are within commuting range, they will decide on the one with the cheapest tuition. Although location and cost are important, they are not the only factors that need to be evaluated. Also critical are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and other qualifiers should influence your final judgment when selecting a plumbing training school. We will discuss that checklist in more detail later in this article. But to begin with, let’s review a little bit about becoming a plumber and the instructional options that are accessible.

Becoming a Plumber

Riverton UT plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Riverton UT plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Riverton UT plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Riverton UT is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Riverton UT plumber repairing water lineThere are several educational options available near Riverton UT to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Technical Schools

When you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your training options. Because there are so many plumbing tech and trade schools in the Riverton UT area, it’s imperative to have a checklist of qualifications that each school must meet. The first 2 that we discussed were location and the cost of tuition. And even though both qualifiers may be critical when making your determination, there are additional factors that need to be taken into account as well. Below is a checklist of those additional qualifiers that you will need to research prior to choosing a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school’s programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Confirm that the Riverton UT program and school are accredited by a U.S. Department of Education recognized accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive an excellent education, it can assist in securing financial aid or student loans, which are in many cases not available for non-accredited programs. Furthermore, many states require that the plumbing training program be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Utah Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Riverton UT schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A low completion rate may indicate that students were unhappy with the course and dropped out. It may also signify that the teachers were not competent to train the students. It’s also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the field, but also that it has the network of contacts to assist grads obtain apprenticeships or employment in the Riverton UT area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational schools will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Find out if the schools you are considering have referring partnerships with local Riverton UT plumbers or plumbing specialists. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also provides employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Riverton UT plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Riverton UT home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you get as much individualized training as possible, which can be challenging in bigger classes. Ask if you can monitor a couple of the classes so that you can see how big they are and witness first hand the interaction between instructors and students. Speak with some of the students and get their feedback regarding class sizes and instruction. Last, speak with some of the teachers and find out what their level of experience is in Riverton UT and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Riverton UT, verify that the schools you are looking at offer those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any due to work, illness or family emergencies.

Trade School Plumbing Riverton Utah

Riverton UT plumber installing pipe fittingChoosing the best plumbing training program will undoubtedly be the most critical decision you will make to launch your new trade. You originally came to this website because of your interest in Trade School Plumbing and wanting more information on the topic How To Become A Plumber. But as we have discussed in this article, there are several factors that you will need to evaluate and compare among the schools you are looking at. It’s a necessity that any plumbing training program that you are evaluating includes a good deal of hands-on instruction. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction should provide a real-world perspective, and the training program should be up-to-date and conform with industry standards. Courses differ in length and the kind of credential provided, so you will need to decide what length of program and certificate or degree will best serve your needs. Each program provides unique possibilities for certification as well. Probably The ideal means to research your short list of schools is to visit each campus and talk with the teachers and students. Invest some time to attend some classes. Inspect the campus and facilities. Make certain that you are confident that the program you select is the ideal one for you. With the proper training, effort and commitment, you can become a professional plumber in Riverton UT.

More Plumbing School Locations in Utah

  • Plumbers School Kamas UT
  • Courses For Plumbers Goshen UT
  • Accredited Plumber Trade Schools Milford UT
  • Plumbing Training Virgin UT
  • Plumber Vocational Schools Lehi UT
  • Accredited Plumbing Trade Schools Mayfield UT
  • Plumbing Course Helper UT
  • Plumbing Training Alton UT
  • Accredited Plumbing Vocational Schools Teec Nos Pos UT
  • Schools For Plumbers Glendale UT
  •  

     

    The location could not be found.

     

     

    Riverton, Utah

    Riverton is a city in Salt Lake County, Utah, United States. It is part of the Salt Lake City, Utah Metropolitan Statistical Area. The population was 38,753 at the 2010 census, but has since grown to over 43,000.[3] Riverton is located in the rapidly growing southwestern corner of the Salt Lake Valley.[4]

    In January 2016, city leaders approved an agreement to develop 543 acres of open land in western Riverton. The land was formerly owned by Suburban Land Reserve, a real estate arm of The Church of Jesus Christ of Latter-day Saints.[6] A major portion of that land is being developed to include a mixed-use shopping center called Mountain View Village. CenterCal Properties, the retail development company behind Station Park in Farmington, is the developer for the project.[6]

    Phase 1 of Mountain View Village opened in June 2018. Businesses open now include: AT&T, Capriotti's Sandwich Shop, Harmon's, HomeGoods, Kirkland's, Michaels, MOD Pizza, Old Navy, PetSmart, Rita's Italian Ice, Sprint, The Good Feet Store, Tillys, T.J. Maxx, T-Mobile, Ulta Beauty, Verizon, and Cafe Zupas.[8] Additional retail, restaurant, and office space will be added as the project progresses in future phases, in addition to a luxury theater.

     

    Business Results 1 - 10 of 185

    Donahue Plumbing Service
    7 Reviews
    Plumbing, Water Heater Installation/Repair, Water Purification Services
    Phone:
    Riverton, UT 84065

    Ace Plumbing and Drain Cleaning
    4 Reviews
    Plumbing, Water Heater Installation/Repair, Water Purification Services
    Phone:
    935 W 14600th S, Riverton, UT 84065

    My Buddy The Plumber Heating & Air
    102 Reviews
    Plumbing, Heating & Air Conditioning/HVAC, Water Heater Installation/Repair
    Phone:
    3169 S Highland Dr, Salt Lake City, UT 84106

    RG Plumbing
    15 Reviews
    Plumbing, Water Heater Installation/Repair
    Phone:
    2581 W Bridle Oak Dr, South Jordan, UT 84095

    1st American Plumbing
    8 Reviews
    Plumbing, Heating & Air Conditioning/HVAC
    Phone:
    Salt Lake City, UT 84096

    Manwill Heating & Air
    74 Reviews
    Plumbing, Heating & Air Conditioning/HVAC, Solar Installation
    Phone:
    385 E 3900th S, Salt Lake City, UT 84107

    Valley Plumbing and Drain Cleaning
    44 Reviews
    Plumbing, Water Heater Installation/Repair, Hydro-jetting
    Phone:
    9285 S Hawley Park Rd, Ste 4, West Jordan, UT 84081

    Smith's Plumbing Heating & AC
    2 Reviews
    Plumbing, Heating & Air Conditioning/HVAC
    Phone:
    1897 W 13035th S, Riverton, UT 84065

    The Plumber Guy
    1 Reviews
    Plumbing
    Phone:
    4843 W Emma Mine Dr, Herriman, UT 84096

    Millcreek Plumbing
    42 Reviews
    Plumbing
    Phone:
    4035 SW Temple, Bldg B, Salt Lake City, UT 84107