Plumbing Training School Shafter CA

How to Select the Right Plumber Course near Shafter California

Shafter CA plumbing contractor installing sinkThe initial step to learning to be a plumbing tradesman or contractor is locating a plumbing school near Shafter CA. But with numerous technical schools to select from, just how do you go about making certain that you enroll in the right one? Particularly since there are a number of points to examine. For instance, some prospective students will commence by searching for schools that are close to their home. After they have located a few that are within driving range, they will choose the one with the least expensive tuition. While location and cost are important, they are not the only factors that should be evaluated. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifications should contribute toward your ultimate decision when choosing a plumbing trade school. We will cover that checklist in greater detail later in this article. But first, let’s talk a little bit about becoming a plumber and the educational choices that are available.

Becoming a Plumber

Shafter CA plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Shafter CA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Shafter CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Shafter CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Shafter CA plumber repairing water lineThere are several educational options available near Shafter CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Technical Schools

Now that you have made a decision to earn a certificate, diploma or degree, you can start to focus your school options. Considering that there are numerous plumbing trade and vocational schools in the Shafter CA region, it’s essential to have a checklist of criteria that each program must satisfy. The first two that we mentioned were location and tuition expense. And even though both qualifiers may be critical when making your decision, there are other variables that must be considered as well. Below is a checklist of those added qualifiers that you will need to analyze before choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have received either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Make sure that the Shafter CA school is accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping guarantee that you acquire a quality education, it may assist in obtaining financial aid or student loans, which are in many cases not available for non-accredited schools. Also, a number of states mandate that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the California Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Shafter CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate might indicate that students were dissatisfied with the course and quit. It may also signify that the instructors were not competent to train the students. It’s similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the trade, but additionally that it has the network of contacts to assist graduates obtain apprenticeships or jobs in the Shafter CA area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught along with an apprenticeship or an internship program. Those participating trade and vocational programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Check if the schools you are comparing have referring partnerships with local Shafter CA plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also furnishes job opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Shafter CA plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you are able to move, the school must be within commuting distance of your Shafter CA home. Remember that if you decide to enroll in an out-of-state school, besides the added relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you receive as much one-on-one training as possible, which can be difficult in larger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and witness first hand the interaction between teachers and students. Talk to a few of the students and get their opinions concerning class sizes and instruction. Last, speak with some of the instructors and learn what their level of experience is in Shafter CA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you are only able to attend classes at night or on weekends near Shafter CA, check that the schools you are considering offer those options. If you can only attend on a part-time basis, make sure that the school you select allows part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Plumbing Training School Shafter California

Shafter CA plumber installing pipe fittingChoosing the best plumbing trade school will probably be the most critical decision you will make to launch your new trade. You originally came to this website because of your interest in Plumbing Training School and wanting more information on the topic Becoming A Master Plumber. But as we have addressed in this article, there are a number of factors that you will need to examine and compare between the schools you are considering. It’s a prerequisite that any plumbing tech school that you are examining includes a considerable amount of hands-on instruction. Classes should be small in size and each student should have their own equipment to train with. Classroom teaching needs to provide a real-world context, and the course of study should be up-to-date and conform with industry standards. Courses vary in duration and the kind of credential offered, so you will have to determine what length of program and degree or certificate will best fulfill your needs. Every program offers unique options for certification as well. Probably The ideal means to research your final list of schools is to visit each campus and talk with the students and faculty. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Shafter CA.

More Plumbing School Locations in California

  • Plumber Vocational School Atascadero CA
  • Plumbing Certificate Julian CA
  • Plumber Class Kelseyville CA
  • Plumbing School Vacaville CA
  • Plumbing Programs Ojai CA
  • Plumber Education Forestville CA
  • Plumbing Training Near Me Madison CA
  • Plumber Certificate Llano CA
  • Plumber Courses Sunol CA
  • Plumber Vocational Schools Westlake Village CA
  •  

     

    The location could not be found.

     

     

    Shafter, California

    Shafter is a city in Kern County, California, United States. It is located 18 miles (29 km) west-northwest of Bakersfield.[2] The population was 16,988 at the 2010 census, up from 12,736 at the 2000 census. The city is located along State Route 43. Suburbs of Shafter include Myricks Corner, North Shafter, Smith's Corner, and Thomas Lane.

    The city of Shafter began as a loading dock along the Santa Fe Railroad right-of-way. The community was named for General William Rufus Shafter who commanded US Forces in Cuba during the Spanish–American War.[2] Property was sold beginning in 1914 and the city incorporated in 1938.

    Also of historical note, Shafter is home to Minter Field, which began operations in June 1941 and saw heavy use during World War II. Approximately 7,000 troops were stationed at the airstrip which hosted up to 600 prisoners of war as well. Today it is publicly owned and administered by the Minter Field Airport District and serves as an industrial center and airport for crop dusters and private aircraft. The Minter Field Museum is maintained on location as well.

     

    Business Results 1 - 10 of 87

    The Honest Plumber
    87 Reviews
    Plumbing, Water Heater Installation/Repair, Contractors
    Phone:
    9530 Hageman Rd, Ste B-118, Bakersfield, CA 93312

    H & A Plumbing Service
    3 Reviews
    Plumbing
    Phone:
    16038 Palm Ave, Wasco, CA 93280

    Roman Rooter Plumbing
    4 Reviews
    Plumbing, Hydro-jetting
    Phone:
    2229 Thelma Dr, Bakersfield, CA 93305

    The Plumbing Doc
    41 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    1730 18th St, Bakersfield, CA 93301

    Ron's Speedy Rooter & Plumbing Repair
    29 Reviews
    Plumbing, Water Heater Installation/Repair
    Phone:
    9530 Hageman Rd, Ste B 200, Bakersfield, CA 93312

    Arron's Plumbing
    12 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    Bakersfield, CA 93309

    Advanced Plumbing Service
    41 Reviews
    Plumbing, Water Heater Installation/Repair, Hydro-jetting
    Phone:
    4253 Renfro Rd, Bakersfield, CA 93314

    Avid Plumbing & Drain
    5 Reviews
    Plumbing
    Phone:
    Bakersfield, CA 93304

    Raytek Leak Detection
    4 Reviews
    Plumbing, Pool & Hot Tub Service
    Phone:
    13823 Cedar Creek, Bakersfield, CA 93314

    EHS & Sons
    1 Reviews
    Contractors, Flooring, Plumbing
    Phone:
    9128 Oak Garden Ln, Shafter, CA 93263

     

    • Contractors License School California

      Let us help you get your California contractors license. 1-800-425-7570 1-800-425 ... Pipeline Contractor C35 | Lathing and Plastering Contractor C36 | Plumbing Contractor C38 | Refrigeration ... Contractors Intelligence School has the highest success rate of all the California contractors license exam schools. We offer full comprehensive ...