Plumbing Trade School Kake AK

How to Find the Best Plumbing Vocational School near Kake Alaska

Kake AK plumbing contractor installing sinkThe first step to becoming a plumbing contractor or tradesman is enrolling in a plumbing school near Kake AK. But with numerous vocational schools to choose from, just how do you approach making certain that you enroll in the best one? Especially because there are so many points to evaluate. For instance, some potential students will start by searching for schools that are nearby their home. When they have identified a few that are within commuting range, they will decide on the one with the cheapest tuition. Although location and cost are of importance, they are not the sole qualifications that should be evaluated. Also critical are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifications should influence your ultimate judgment when choosing a plumber trade school. We will talk about that checklist in greater detail later in this article. But to begin with, let’s talk a little bit about becoming a plumber and the educational choices that are offered.

Becoming a Plumber

Kake AK plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Kake AK plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Kake AK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Kake AK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Kake AK plumber repairing water lineThere are several educational options available near Kake AK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Tech Schools

Once you have made a decision to obtain a diploma, certificate or degree, you can start to refine your training options. Considering that there are so many plumbing vocational and trade schools in the Kake AK region, it’s important to have a checklist of qualifications that each program must satisfy. The first two that we mentioned were location and tuition expense. And even though both qualifiers may be critical when making your determination, there are additional variables that need to be considered as well. Following is a checklist of those added qualifications that you will need to assess before selecting a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have received either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school’s programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Make sure that the Kake AK school and program are accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a quality education, it can help in obtaining financial aid or student loans, which are in many cases unavailable for non-accredited programs. Also, many states mandate that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Alaska Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Kake AK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate may suggest that students were unhappy with the course and quit. It could also suggest that the teachers were not qualified to train the students. It’s similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has an excellent reputation within the field, but also that it has the network of contacts to assist grads obtain apprenticeships or jobs in the Kake AK area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and technical schools will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Find out if the schools you are comparing have working relationships with local Kake AK plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be expecting. If not, ask a local Kake AK plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your Kake AK residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s important that you get as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can monitor a few of the classes so that you can observe how big they are and witness first hand the interaction between instructors and students. Talk with several of the students and get their comments concerning class sizes and instruction. Finally, talk to some of the instructors and learn what their level of experience is in Kake AK and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Kake AK, confirm that the programs you are reviewing offer those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Plumbing Trade School Kake Alaska

Kake AK plumber installing pipe fittingChoosing the right plumbing training program will probably be the most important decision you will make to start your new profession. You originally came to this website because of your interest in Plumbing Trade School and wanting more information on the topic Plumber Vocational Schools. But as we have covered in this article, there are a number of factors that you will need to examine and compare between the schools you are reviewing. It’s a must that any plumbing training that you are considering includes a lot of hands-on training. Classes should be small in size and every student should have their personal equipment to train with. Classroom teaching should provide a real-world context, and the course of study should be current and conform with industry standards. Programs vary in length and the kind of credential provided, so you will have to determine what length of program and certificate or degree will best satisfy your needs. Every training program offers unique possibilities for certification also. Probably the best way to research your final list of schools is to visit each campus and talk with the faculty and students. Take the time to sit in on a few classes. Inspect the campus and facilities. Make certain that you are confident that the school you decide on is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Kake AK.

More Plumbing School Locations in Alaska

  • How To Become A Plumber Allakaket AK
  • Plumber Online Schools Koyukuk AK
  • Online Plumber Schools Koyuk AK
  • Plumber Training Near Me Northway AK
  • Plumbing Technology School Kotzebue AK
  • Plumbing Trade Schools Kalskag AK
  • Plumbing Courses Near Me Nuiqsut AK
  • Plumber Schools Online Kwethluk AK
  • Plumber Vocational School Kotlik AK
  • Schools For Plumbing Mc Grath AK
  •  

     

    The location could not be found.

     

     

    Kake, Alaska

    Kake (/ˈkeɪk/, like 'cake') is a first-class city in Prince of Wales-Hyder Census Area, Alaska, United States. The population was 557 at the 2010 census.[3] The name comes from the Tlingit word Ḵéix̱ (Northern Tlingit) or Ḵéex̱ (Southern Tlingit), which is derived from ḵée 'dawn, daylight' and x̱ʼé 'mouth', i.e. 'mouth of dawn' or 'opening of daylight'.

    Kake is located at 56°58′15″N 133°56′2″W / 56.97083°N 133.93389°W / 56.97083; -133.93389 (56.970841, -133.933751).[5] Kake is on the northwest coast of Kupreanof Island in the Alexander Archipelago in southeastern Alaska.

    According to the United States Census Bureau, the city has a total area of 14.2 square miles (37 km2), of which, 8.2 square miles (21 km2) of it is land and 6.0 square miles (16 km2) of it (42.37%) is water.

     

    Business Results 1 - 10 of 0

     

    • Alaska Plumber Continuing Education | Plumbers Training ...

      This continuing education course is designed to fulfill 8 hours of code for administrators and 8 hours of industry related credits for the Journeyman license for renewal of Alaska Plumbing licenses. Topics include code highlights from the Uniform Plumbing Code. course details. $99.00.

    • Alaska Journeyman Plumber Renewal - 16 Hour Bundle - CE ...

      This Alaska Continuing Education Course Bundle contains all you need to renew your Journeyman Plumbing license. It includes 4 of our simple and easy to use CE courses for a total of 16 CE hours. Each course has been approved by the State of Alaska.

    • Anchorage – Alaska Apprenticeship Training Coordinators ...

      The Plumbers and Pipefitters recently built a new training center on their Potter Drive training site. The 9600 square foot school trains plumbers and pipefitters for projects located South of the 63rd parallel in Alaska. The program currently employs one full time instructor and four part-time instructors.

    • Alaska Plumbing Continuing Education – Online – American ...

      Alaska Plumbing Continuing Education – Online License Requirements Journeyman Plumbers are required to obtain 16 hours of continuing education within the 24 months immediately preceding renewal, of which at least 8 hours must be comprehensive UPC code or UPC code updates and 8 hours may be industry related.

    • Plumbing and Electrical - Alaska Dept of Labor

      Plumbing Inspectors conduct inspections of all new and altered plumbing, gas, and fuel piping installations in communities of 2,500 and above. Inspection reports are provided free-of-charge to owners and contractors. To request an inspection, please call the Mechanical Inspection office at (907) 269-4925 or by email at [email protected]

    • Plumber CEU By State – American Plumbing Institute

      Plumbing CEU Courses. Alaska; Idaho; Oregon; South Dakota; Washington; Contact Us; 855-475-5374; Returning User | Login; Plumber CEU By State. Choose from our State APPROVED continuing education courses below: Alaska. Continuing Education Courses for Alaska. Idaho. Continuing Education Courses for Idaho. Oregon. Continuing Education Courses for ...

    • CE Made Simple - Alaska Mechanical Administrator (CE ...

      Choose an Alaska Plumber CE Course & Get Started. Choosing an Alaska Mechanical Administrator continuing education course is easy with CE Made Simple. You will need your state license number and an account with us. Your account will track all of your course completions and provide certificates. To begin, select your course below.

    • Alaska CEU - Continuing Education Credits (Hours) for ...

      A Journeyman Plumbers (JP) Fitness License is required for all plumbing work performed in the State of Alaska. JPs are required to have 16 hours of continuing education every two years. There must be a minimum of 8 hours of comprehensive general code and a maximum of 8 hours of industry related education. Alaska CEU's Uniform Plumbing Code (UPC) course is 8 hrs of comprehensive general code combined with 8 hrs of industry related International Mechanical Code (IMC) which meets all the ...

    • Plumbing Training In Anchorage Alaska | Plumbing Training ...

      Plumbing Training In Anchorage Alaska Get ready to enter into a highly rewarding and in-demand new future as a plumber by taking plumbing courses within your local area of Alaska. See below for descriptions of these programs and the precise school and campus locations near Anchorage.

    • Alaska Plumber Exam Prep & CE | Plumbers Training Institute

      This continuing education course is designed to fulfill 8 hours of code for administrators and 8 hours of industry related credits for the Journeyman license for renewal of Alaska Plumbing licenses. Topics include code highlights from the Uniform Plumbing Code. course details. $99.00.