Trade School Plumbing Craig AK

How to Pick the Right Plumbing Vocational School near Craig Alaska

Craig AK plumbing contractor installing sinkThe first step to becoming a plumbing contractor or tradesman is locating a plumbing school near Craig AK. But with numerous vocational schools to pick from, just how do you approach making certain that you enroll in the ideal one? Especially since there are so many factors to examine. For example, many potential students will commence by looking for schools that are close to their residence. When they have located several that are within driving distance, they will select the one with the least expensive tuition. Although location and cost are significant, they are not the sole factors that should be evaluated. Also critical are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and additional qualifiers should contribute toward your final decision when picking a plumber training school. We will address that checklist in greater detail later in this article. But first, let’s talk a little bit about becoming a plumber and the instructional options that are available.

Becoming a Plumber

Craig AK plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Craig AK plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Craig AK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Craig AK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Craig AK plumber repairing water lineThere are several educational options available near Craig AK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Trade Schools

Now that you have made a decision to obtain a certificate, diploma or degree, you can start to refine your training options. Since there are numerous plumbing trade and vocational schools in the Craig AK area, it’s imperative to have a checklist of qualifications that each program must satisfy. The initial two that we talked about were location and the cost of tuition. And even though both qualifiers may be crucial when making your decision, there are additional variables that need to be taken into account as well. Following is a checklist of those added qualifiers that you will need to analyze prior to choosing a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing vocational programs have attained either a regional or a national accreditation. They can receive Institutional Accreditation, which focuses on the school’s programs overall, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Confirm that the Craig AK program and school are accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you acquire a quality education, it can assist in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Furthermore, some states mandate that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Alaska Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Craig AK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate could suggest that students were disappointed with the program and quit. It may also signify that the instructors were not qualified to train the students. It’s also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the trade, but additionally that it has the network of contacts to help graduates acquire apprenticeships or employment in the Craig AK area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are comparing have referring relationships with local Craig AK plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. If not, ask a local Craig AK plumbing company if they can provide some tips.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Craig AK home. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It’s important that you receive as much individualized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how large they are and experience the interaction between instructors and students. Talk with some of the students and get their comments regarding class sizes and instruction. Last, talk with a few of the instructors and find out what their level of experience is in Craig AK and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to handle your needs. If you can only go to classes at night or on weekends near Craig AK, confirm that the schools you are reviewing provide those options. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family issues.

Trade School Plumbing Craig Alaska

Craig AK plumber installing pipe fittingPicking the best plumbing trade school will probably be the most critical decision you will make to start your new career. You originally came to this website because of your interest in Trade School Plumbing and wanting more information on the topic How To Become A Plumber. But as we have covered in this article, there are several factors that you will need to assess and compare between the schools you are considering. It’s a necessity that any plumbing tech school that you are examining includes a lot of hands-on instruction. Classes need to be smaller in size and each student must have their own equipment to train with. Classroom education needs to provide a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential offered, so you will have to ascertain what length of program and credential will best fulfill your needs. Every training program offers unique options for certification as well. Probably the best means to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the program you decide on is the right one for you. With the proper training, effort and dedication, you can become a professional plumber in Craig AK.

More Plumbing School Locations in Alaska

  • Schools For Plumbing Mc Grath AK
  • Plumber Vocational Schools Nightmute AK
  • Online Plumber Schools Sterling AK
  • Plumbing Technical Schools Noatak AK
  • Plumber Trade Schools Sleetmute AK
  • Plumbing Trade School Aniak AK
  • School For Plumbing Lower Kalskag AK
  • Plumbing Technical Schools Eielson Afb AK
  • Trade School Plumbing Trapper Creek AK
  • Learning Plumbing Meyers Chuck AK
  •  

     

    The location could not be found.

     

     

    Craig, Alaska

    Craig (Tlingit: Sháan Séet) is a first-class[13] city in the Prince of Wales-Hyder Census Area in the Unorganized BoroughA[›] in the U.S. state of Alaska. The population was 1,201 at the 2010 census,[9] down from 1,397 in 2000.

    Craig is the largest town on Prince of Wales Island, the fourth largest island in the USA.[4] Craig is approximately 56 miles (90 km) by air northwest of Ketchikan and 220 miles (350 km) south of Juneau.[4]

    According to the United States Census Bureau, the city has a total area of 9.4 square miles (24.3 km2), of which, 6.7 square miles (17.4 km2) of it is land and 2.7 square miles (7.0 km2) of it (28.94%) is water.

     

    Business Results 1 - 10 of 0